SKYDAS STRANDART entrance doors


entrance metal door with glass skydasThis door is ideal for a private house or cottage, as it is made of durable bent metal construction with full thermal insulation and is characteristic of good thermal and sound insulation. The finish of the door suitable for outdoors is made of waterproof, certified Belgian board Umidax HLS, which retains its characteristics even after mechanical damage. The board is painted in polyurethane paint that does not discolour for many years. The door can be non-standard and fire resistant. 


It is recommended to use galvanized steel RUUKKI for entrance door construction.

 

 

More about the features of the door
Standard door set
Certificates and technical data

  

sound insulation doors skydas

Rating of sound insulation

41 dB Rw (C;Ctr)

rating of thermal transmittance

Rating of thermal transmittance

1,3 W (m2-K)

repeated opening and closing

Resistance to repeated opening and closing

100 000 cycles

resistance to wind load

Identification of resistance to wind load

Class C5

measurement of air permeability doors

Measurement of air permeability

Class 4

water tightness metal doors

Identification of water tightness

Class 6A

mechanical strength door

Identification of mechanical strength and rigidity

Class 4 

fire resistance door

Identification of fire resistance (optional)

EI 30/ EI45

 


Standard door set:

  1. Door frame - bent L-shaped profile fixed in the door aperture by 8 pins. Complete thermal insulation by rock wool or foam.
  2. Door leaf – special bent metal structure; 100% thermal insulation by 50 mm rock wool; total width of the leaf – 75 mm.
  3. Hinges with supporting bearings, covered with chrome-plated finishing caps – 2 pieces.
  4. Protective roll pins for door hinges (16 mm Ø) – 2 pieces.
  5. Insulation seals – 2 pieces.
  6. Peephole (14 Ø).
  7. Outside and inside door leaf finish – UMIDAX - HLS board.
  8. Outside architraves.
  9. Locks.

 


Door characteristics

rating of thermal transmittance Saves the heat in your home
As the bent profile leaf structure does not have closed cavities, it can be completely thermally insulated by 50 mm rock wool. The L-shaped bent frame and threshold ensure exclusive tightness as an additional seal is applied to the entire perimeter (two seals in total).

Thermal transmittance of SKYDAS STANDART is 1.3 W/(m2–K), i.e. the same like of 6-chamber plastic windows (the lower the transmittance, the more heat is held in). Therefore, this door is suitable not only for an apartment, but also for a private house (using the materials suitable for outdoor conditions).

measurement of air permeability Tight, good heat and sound insulation  
Due to the above mentioned full thermal insulation of the door construction, the sound insulation of the door SKYDAS STANDART is 41 dB.
This door is especially tight and therefore, perfectly shuts out the odours and smoke from the outside.

fire proof doors Fire resistant
With additional fire resistant components SKYDAS STANDART can protect from fire for as long as 45 minutes and withstand the temperature of 1000ºC. The certificate was issued by Inspecta Estonia OU, No. 1527-CPD-0017. The boiler room doors of private houses already have to meet fire protection requirements. The fire can also spread from the garage.

repeated opening and closing Durable and lasting, convenient to use
All SKYDAS doors are manufactured by especially precise programmed machines Amada, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 100,000 cycles of opening and closing, the construction of the door remained completely intact.

As the internal construction of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion.

The door finish is made of waterproof, certified Belgian board Umidax HLS, which can be milled without bothering about bulging, flaking or losing its characteristics. The board is painted in your selected polyurethane paint that does not discolour for many years.

Under necessity, door finish can be easily replaced.

It is recommended to use galvanized steel RUUKKI for entrance door construction. 

simple to take care Simple to take care of
Painted door finish does not require any specific care and is easy to clean with non-abrasive cleaners.

door design possibilities Available designs
You can choose from almost 200 standard carvings or we will produce the doors according to individual design.
Doors can be with the glazing of various shapes, single leaf, double leaf, with arch, etc.

However, if higher security level is necessary, choose security doors SKYDAS STANDART 2, SKYDAS STANDART 3, or SKYDAS PREMIUMwhich burglar resistance was tested and certified in an authoritative notified scientific research laboratory IFT Rosenheim, Germany. These door models were created applying the knowledge of the above mentioned laboratory of all possible ways and methods of burglary.


Technical data

 

Available versions of the door:

 doors selection

The door is manufactured precisely according to necessary measurements.

Important:
Fire resistance EI45 of the fire resistant door is applicable to measurements up to 2100x 980 mm. If the height or width is increased by 15% (but not more than 20% of the total area), fire resistance will be EI30.

crosscut skydas standart doors
Threshold

Available thresholds (2 mm thick):

  1. black metal,
  2. RUUKKI galvanized steel,
  3. matt stainless steel:

 skydas door threshold

Certificates

fire proof certificatefire proof certificatecertificate CE

 
 

 

Your questions

check